Ultimate questions on Linux, the Universe and everything

The FusionMPT SAS2 based cards by LSI are cheap RAID cards that perform well in RAID 0 and 1 under Linux with SSDs and ZFS arrays. They are used in many 1U servers with one or two disks. They are also a popular SAS 6.0 / SATA III controllers for enthusiasts. You can get them cheap on ebay. Before SATA III was common on motherboards, this was THE card to get. It can still be useful if you need SAS disks or additional disks or have a need for disk enclosures. It is identical to the LSI MegaRAID SAS 9220-8i. The same hardware is also used in LSI 9240 and LSI 9211. It is possible to use the BIOS from another card (crossflashing) to change the features of the card. There are a few different BIOS files you can use. Specifications:  Official LSI information 8-lane, 5 GT/s PCI Express 2.0 Identical to LSI 9240-8i card 6 Gb/s per port Two x4 internal SFF-8087 connectors Controller LSISAS2008 Low cost SATA+SAS RAID solution RAID levels 0, 1, 5, 10, 50 and JBOD mode >2TB

Tablets usually have only a few USB ports. The Viewsonic Viewpad 10pi has two. I'll show later that this makes things a bit complicated. Because of the badly supported hardware in Z670 tablets, you have to improvise a few things. The graphics chip doesn't necessary let the installer run in grahical mode and the Wi-fi chip is not detected automatically by the installer. I first tried installing Fedora 20. It failed, because the Wi-fi chip was not detected and the installer refused to continue without a configured network device (at least the text mode installer, because the graphical installer refused to run). Using an external USB Wi-fi device helped, but Fedora fails to start X-windows on this graphics chip. I'm not sure what the problem is. It doesn't load the required module, gma500_gfx, automatically. Loading it manually doesn't help. Then I tried Debian. It turned out that Debian automatically loads the graphical driver and it is possible to start X. This